Mustang News
2007 Ford Shelby GT500 Officially Rated At 500 Horsepower
- Ford Shelby GT500 officially rated at 500 horsepower, 25 horsepower higher than preliminary estimates
- The Shelby GT500 will go on sale this summer with more horsepower than any previous factory-built Mustang
The most powerful factory-built Mustang ever just got even more potent. Final certification testing of the Shelby GT500’s 5.4-liter supercharged V-8 shows it will produce 500 horsepower and 480 lb.-ft. of torque – 25 more horsepower than preliminary estimates.
“With 500 hp and the Shelby name, this car is an instant legend," said Hau Thai-Tang, director, Advanced Product Creation & SVT programs. "This is the most powerful, most capable Mustang ever."
The Ford Shelby GT500's supercharged 5.4-liter, 32-valve V-8 is a result of Ford's experience in developing the modular V-8 and V-10 engine series. The engine is force-fed air via a "Roots-type" supercharger providing 9 pounds per square inch of boost. It borrows the four-valve cylinder heads, piston rings and bearings, from the Ford GT engine.
The 500 hp rating was obtained using the Society of Automotive Engineer's latest standard and was witnessed by an objective third party. The Shelby GT500's 5.4-liter supercharged V-8 will be built at Ford's Romeo Engine Plant in Romeo, Mich. Pricing will be announced closer to launch.
The right to purchase the first 2007 Ford Shelby GT500 was auctioned for $600,000, with the proceeds benefiting the Carroll Shelby Children's Foundation. The 2007 Ford Shelby GT500 goes on sale this summer
Technical Specifications
Type
V-8
Manufacturing location
Romeo, Michigan
Configuration
Iron Block and Aluminum Heads
Intake manifold
Cast-aluminum with Roots-type supercharger and air-to-water intercooler
Exhaust manifold
Cast iron
Crankshaft
Forged steel
Throttle Body
Dual 60 mm, electronic
Valvetrain
DOHC, 4 valves per cylinder
Valve diameter
Intake: 37.0 mm; Exhaust: 32.0 mm
Pistons
Forged aluminum
Connecting Rods
Cracked forged steel I-beams
Ignition
Coil-on-plug
Bore x stroke
3.552 x 4.165 in. / 90.2 x 105.8 mm
Displacement
330 cu. in. / 5,409 cc
Horsepower
500 hp @ 6,000 rpm (SAE Certified)
Torque
480 lb.-ft. @ 4,500 rpm (SAE Certified)
Compression ratio
8.4:1
Redline
6,250 rpm
Idle Speed in Neutral
750 rpm
Engine control system
Spanish Oak PCM
Required fuel
Premium
Fuel Injection
Electronic returnless sequential
Oil capacity / type
6.5 quarts / Motorcraft 5W-50 Full Synthetic Motor Oil
Coolant capacity
21 quarts
Peak Boost
9 psi
- Ford Motor Company, Press Release, Monday, May 1, 2006
Monday, July 17, 2006
Spec of 2007 Ford Shelby GT500
Subscribe to:
Posts (Atom)