Friday, July 14, 2006

Early History of the Chevrolet Corvette 1953 - 1980 - PART 2

There have been six generations of the Corvette so far.

The generations can be referred to as versions C1 through C6, but the first generation is more commonly referred to as a solid-axle, based on the fact that independent rear suspension (IRS) was not available until 1963.

The first generation started in 1953 and ended in 1962, with the noteworthy addition of optional fuel injection in 1957. This new induction system first saw regular use on a gasoline engine two years prior on the Mercedes-Benz 300SL "Gullwing" roadster.

Although the Corvette's GM-Rochester fuel injection system used a constant flow style fuel injection system as opposed to the diesel style nozzle metering system of the Mercedes' six cylinders, the system nevertheless produced about 290 hp. The number was derated by Chevrolet's advertising agency for the 283 hp/283 in³ (4.6 L) "one hp per cubic inch" slogan, making it one of the first mass-produced engines in history to reach 1 hp/in³.

In 1962, the GM small block was enlarged to 327 in³ (5.4 L) and produced a maximum of 360 hp (268 kW). Other early options included power windows (1956), hydraulically operated power convertible top (1956), four speed manual transmission (mid 1957), and heavy duty brakes and suspension (1957).

The second or mid-year generation, designed by Larry Shinoda, with major inspiration from a previous unproduced design called the "Q Corvette" by Peter Brock and Chuck Pohlmann, and under the styling direction of Bill Mitchell, started in 1963 and ended in 1967.

1963 Chevrolet Corvette split-window coupe

1963 would see the introduction of the new Corvette Sting Ray coupé with its distinctive split rear window and fake hood vents as well as an independent rear suspension. The split rear window was discontinued in 1964 due to safety concerns. Because they made the design too busy, the hood vents were also cut.

Power for 1963 was at 365 hp (272 kW) hitting 375 hp (280 kW) in 1964. Four-wheel disc brakes were introduced in 1965, as was a "big block" engine option (the 396 in³ (6.5 L) V8). Side exhaust pipes appeared on the 1965 Stingray and persisted through 1969.

Chevrolet would up the ante in 1966 with the introduction of an even larger 427 in³ (7 L) version, creating what would be one of the most collectable Corvettes ever. 1967 saw a L88 version of the 427 introduced which was rated at 430 hp (321 kW), but unofficial estimates place the actual output at 550 hp (410 kW) or more.

Only twenty such engines were placed in the 1967 Corvette, and the cars can fetch US$600,000 or more in auction today. From 1967 to 1969, the 1282 ft³/min Holley triple two-barrel carbuetor, or Tri-Power, was available on the 427. The 1967 Corvette originally was going to be the first of the C3 generation; however, due to delays the C3 had to be put off until 1968.

Other early options available on the C2 included an AM-FM radio (mid 1963), air conditioning (1963), a telescopic steering wheel (1965) and headdrests, presumably to prevent whiplash (1966).


1965 Corvette 327/375HP Fuel Injected Roadster

The 1965 introduction of the 425 hp 396 in³ big block was ultimately the harbinger of doom for the Rochestern fuel injection system. The 396 in³ option cost $145 while the fuel injected 327 in³ engine cost $500. Few people could justify spending $355 more for 55 hp less. When less than a thousand fuel-injected cars were built in 1965, Chevrolet stopped the program.

In 2004, Sports Car International named the Stingray number five on the list of Top Sports Cars of the 1960s. The design of this generation had several inspirations. The first was the contemporary Jaguar E-Type, one of which Mitchell owned and enjoyed driving frequently. Bill Mitchell also sponsored a car known as the "Mitchell Sting Ray" in 1959, because Chevrolet no longer participated in factory racing. This vehicle had the largest impact on the styling of this generation, although it had no top and didn't give away what the coupe would look like.

The third inspiration was a mako shark that Mitchell had caught while deep-sea fishing.In 1962 Corvette chief engineer Zora Arkus-Duntov came up with a lightweight version of the C2. Concerned about Ford and what they were doing with the Shelby Cobra, GM planned 100 Grand Sport Corvettes.

The plans never came about and only five were built. They were driven by historic drivers such as Roger Penske, A. J. Foyt, Jim Hall, and Dick Guldstrand among others. The Grand Sports, however, had many issues; the aero package made for a very frightful driving experience to say the least. Delmo Johnson said it was "the only car I ever drove that would lift the front wheels off the ground in all four gears."

Dick Thompson was the only driver to drive the Grand Sport to victory. He won a Sports Car Club of America race at Watkins Glen. Today there are only five left, cars 001-005 all held by private owners. They are among the most coveted and valuable Corvettes ever built.



Source - Wikipedia

Classic American Muscle Cars

technorati tags:, , , , , , , , , ,

No comments: